Domnick Hunter Air Compressor Filter In Line Precision Filter

1, precision filter permeability:
Oil filter adopts the strong hydrophobic hydrophobic fiber filter material, at the same time with good permeability and high strength of the skeleton, reduce the resistance caused by passing.
2, precision filter efficiency:
Filter adopts the Germany's fine hole sponge, can effectively prevent oil and water entrained by the high-speed flow, make the passing down of tiny droplets gathered in the lower filter sponge, side by side to the filter at the bottom of the container.
3, precision filter, air tightness:
Filter and filter shell combining site using a reliable sealing ring, to ensure that the air flow is not short circuit, to prevent impurities without direct access to the downstream filter.
4, precision filter corrosion:
Filter corrosion of reinforced nylon cover and anticorrosive filter frame, can be used in harsh conditions.

 PF Grade
Primary Pre-filtering
Remove larger than 25μm of dust particles, including water mist and oil mist.
AO Grade
High Efficiency General Protection
Remove larger than 1 μm dust particles, water mist and oil mist. Oil mist does not exceed the maximum content of 0.5mg / m³ (21 ℃) /0.5ppm (w) (70 ℉).
AA Grade
High Efficiency Oil Removing Filtering
(Front to be equipped with AO grade filter) remove larger than 0.01μm dust particles ,water mist and oil mist. Oil mist does not exceed the maximum content of 0.01mg / m³ (21 ℃ ) /0.01ppm (w) (70 ℉).
AX Grade
Ultra-high Efficiency Filtering
(Front to be equipped with AO grade filter) remove larger than 0.01μm dust particles ,water mist and oil mist. Oil mist does not exceed the maximum content of 0.001mg / m3 (21 ℃) /0.001ppm (w) (70 ℉)
AR Grade
Universal Eliminate Dust filtering
Remove larger than 1 μm dust particles.
AAR Grade
High Efficiency Eliminate Dust filtering
Remove larger than 0.01μm dust particles.
ACS Grade
Removing Oil Vapors and Odors
(Front to be equipped with AA grade filter) residual oil vapor does not exceed the maximum amount of 0.003mg / m³(21 ℃ ) /0.003ppm (w) (70 ℉)

 Replacement Domnick Hunter Series
Type Flow Rate(m³/min) Filtration Rating(μm) Oil Content(ppm)
K009 0.5
K017 1 PF Grade: 25
K030 3.6 AO Grade: 1 1
K058 4.8 AA Grade: 0.01 0.01
K145 8.7 AX Grade: 0.01 0.001
K220 13.2 ACS Grade: 0.01 0.001
K330 20 AR Grade: 1
K430 25.8 AAR Grade: 0.01
K620 40

Domnick Hunter Filter Model as flows:

K009PF, K009AO , K009AA, K009AX, K009ACS, K009AR, K009AAR
K017PF, K017AO, K017AA, K017AX, K017ACS, K017AR, K017AAR
K030PF , K030AO, K030AA, K030AX, K030ACS, K030AR, K030AAR
K058PF, K058AO, K058AA , K058AX, K058ACS, K058AR, K058AAR
K145PF, K145AO, K145AA, K145AX, K145ACS, K145AR , K145AAR
K220PF, K220AO, K220AA, K220AX, K220ACS, K220AR, K220AAR
K330PF, K330AO, K330AA, K330AX , K330ACS, K330AR , K330AAR
K430PF, K430AO , K430AA, K430AX, K430ACS , K430AR , K430AAR
K620PF, K620AO , K620AA, K620AX , K620ACS, K620AR, K620AAR

Owing 9 years producing and designing experience in filtration line, Keruida Filtration Technology Co.,Ltd specializes in the products of filter, filtering equipment, purgative system and oil(Water) and gas separating plants. According to the standard of ISO9001, we have established a complete set of quality assurance system and obtained the certification of ISO9001/2008 international quality system. Therefore,we are qualified to offer the first class products and perfect aftersale service to the clients.From Xinxiang, KERUIDA exports to customers in Europe, the Far East, Middle East and South America. Customer specified delivery dates are routinely met at a 100% service level. Engineering, manufacturing and quality control Proprietary design have been the keys to KERUIDA’s success and growth. Streamlined manufacturing techniques, a totally qualifie engineering staff, tight quality control and a concentrated focus on customer service have enabled KERUIDA to broaden their product offering beyond filter products.